Portable Dustless Sand Blasting Machine for Refineries Cleaning /
Paint Removal
Product Introduction:
Applicable to large steel structural parts, ships, bridges,
aerospace, military products, track equipment, wind power towers,
port machinery, petroleum machinery, engineering machinery, mining
machinery, textile machinery, special vehicles, large castings,
inner and outer walls of steel pipes, etc. rust.
Basic parameters:
The interior of the blasting chamber body forms a layer of airflow
from the top to the bottom of the chamber body under the action of
the wind force. The abrasive material forms a solid-gas mixture
through the compressed air and is sprayed onto the surface of the
workpiece for chip cutting. Part of the abrasive chips are broken
to form dust. The downward flowing air stream drives the dust in
the air to mix the abrasive and the rust-removing impurities, and
returns to the sorting system through the honeycomb returning sand
floor for sorting. After sorting, the recyclable sand is returned
to the storage bin for automatic sandblasting according to the
requirements of sandblasting; the non-reusable dust and impurities
are taken to the dust collector for fine filtration, and the dust
is deposited. After the waste container is recycled, the gas
filtered by the filter element is re-discharged to the atmosphere
or recycled for use in the blasting room. The whole work process is
closed, no dust spill, safe and environmentally friendly.
The complete equipment of mechanical circulation recovery type
blasting room is mainly composed of blasting room body, lighting
system, aerodynamic recovery floor, sorter, sandblasting system,
dust collector, fan, control system, workpiece conveying system,
and operator protection system. . |
STR-LT-3-12 standard module dust collector main technical
parameters
Dust removal form: filter cartridge dry
Dimensions: 2020*1420*4050mm (L*W*H)
Filter cartridge specification: φ350*1320mm (consisting of 2
φ350*660mm filter cartridges)
Number of filter cartridges: 12
(1) Lifting and transportation precautions
1. The machine's conventional packaging is wrapped in a foam film
and indicates the direction and position of the center of gravity.
2. Pay attention to the direction of gravity when lifting or
shovel, so as not to overturn the machine.
3. Be careful when handling the machine, and do not allow rough
handling.
4. This machine is strictly prohibited from being placed upside
down during handling.
